|
Post by Orange on Oct 10, 2017 6:28:25 GMT -8
|
|
|
Post by Orange on Oct 9, 2017 12:22:18 GMT -8
did anyone tried to make pizza on top of the barrel like this:
|
|
|
Post by Orange on Oct 9, 2017 12:04:30 GMT -8
I can't see any photos, damn photobucket.
|
|
|
Post by Orange on Oct 9, 2017 11:57:13 GMT -8
great, problem solved i'll put some old tiles in the box, they are 1/3 of the firebrick tiles in weight and size and not an issue if they break.
|
|
|
Post by Orange on Oct 8, 2017 11:17:28 GMT -8
I'm sure you've built it correctly but I remember that rockets can reach around 1000C on top of riser so if you put a barrel on top the temperature can be slightly lower.
|
|
|
Post by Orange on Oct 8, 2017 11:11:00 GMT -8
That could certainly work... Although you would need something like 6 or more inches of perlite to match the 1" ceramic fiber blanket inside a 10" metal stove pipe held by just being slightly over the required circumference in width, that another forum member came up with. I can't remember who... But it was genius. I think perlite and ceramic fiber have similar thermal conductivity but yes, ceramic boards seem the best solution so far although there are also perlite boards...
|
|
|
Post by Orange on Oct 8, 2017 11:06:00 GMT -8
Almost every rocket has a bench or a bell, but not a bed. And almost no one is sleeping all night on it.
Why is it so? What are your experiences? Is the radiant heat from the bricks too aggressive to sleep on?
|
|
|
Post by Orange on Oct 8, 2017 11:01:19 GMT -8
ok is there any other material that is light, strong and heat resistant? and in full ceramic box, p-channel is much more insulated than in firebrick one. Any concern that the secondary air isn't preheated enough?
|
|
|
Post by Orange on Oct 8, 2017 10:48:20 GMT -8
Klemen, how's sleeping on rocket bench, comfortable during whole night?
|
|
|
Post by Orange on Oct 7, 2017 11:03:23 GMT -8
I guess now we can also make P-channel out of ceramic and if the fireclay bricks are only used now for protection of ceramic than they can be replaced by a thin metal sheet and reduce mass even more It would probably work in a J, but “Metal is doomed” - I think the fire brick brick splits are still necessary in a batch box.. yes but you only need some scrap metal sheet for the bottom and sides where it isn't too hot. And you can use it later to throw the ash out
|
|
|
Post by Orange on Oct 6, 2017 8:03:53 GMT -8
At five hours, open door pizza oven temp is 260• and barrel top temp is 256•. woah I thought the temps are in C. Maybe it needs more secondary air or the air isn't warm like in the metal P-channel. I guess oven is isolated from smoke because ceramic boards probably have some binder chemicals. Stove looks cool, especially round heat riser look edible
|
|
|
Post by Orange on Oct 6, 2017 7:45:17 GMT -8
I guess now we can also make P-channel out of ceramic and if the fireclay bricks are only used now for protection of ceramic than they can be replaced by a thin metal sheet and reduce mass even more
|
|
|
Post by Orange on Oct 6, 2017 6:17:05 GMT -8
|
|
|
Post by Orange on Oct 5, 2017 12:33:12 GMT -8
so berry how's the thing working? Did you put a bypass?
|
|
|
Post by Orange on Oct 5, 2017 11:50:23 GMT -8
and for the bottom you can use Ytong blocks instead of concrete, that way heat doesn't leak into ground much.
|
|