|
|
Post by josephcrawley on Jan 24, 2022 9:17:14 GMT -8
Just because the guy wears a track suit and listens to rap does not make him a gopnik. But he could be mafia.....
|
|
serg247
Junior Member
The mountain can not be conquered, it can allow it to ascend...
Posts: 111 
|
Post by serg247 on Jan 24, 2022 9:44:49 GMT -8
Mafia goodfathers don't lay bricks...  |
|
|
|
Post by Jura on Nov 15, 2024 10:56:49 GMT -8
youtube.com/c/AlekseyStopchikThis fellow is a stove builder in Ukraine who has a lot of SketchUp plans that he walks through layer by layer. Rather informative even without understanding the language. A bit of off topic... Aleksey is no longer in UA. His house in Nova Kahivka was razed down by the kind Russian murderers. Just one day after they escaped. he has lost lots of data alone with his HDD. |
|
|
|
Post by Jura on Nov 15, 2024 11:17:46 GMT -8
I think some of the construction details will be helpful to folks that visit this site. Lots of details about how to properly bed doors and clean outs and also where to allow for expansion. If you liked the workings of the guy you linked I believe you will find this guy really informative youtube.com/channel/UC5733atcUXNRWu9RBHFj5Fw?si=VoXcsctCl3g8zHzPI mus t admit I learned a few tricks from him. Btw. A colegue of mine makes living by constructing Kuznetzov stoves. Clients seems to be pretty satisfied with his works. Shall you need an info or detail I believe he would answer it. He does not speak english thou. The engineering part of me does not want to accept the dry seam idea. We frequently use the two bell and downdraft construction ( for its equal heat distribution and its reasonable extraction ), but with another core. EDIT: I did not pay attention to the date of the OP post My RSS reader has displayed it as a new one. . |
|
