|
|
Post by shilo on May 11, 2016 9:47:14 GMT -8
|
|
morticcio
Full Member
"The problem with internet quotes is that you can't always depend on their accuracy" - Aristotle
Posts: 371
|
Post by morticcio on May 13, 2016 2:43:51 GMT -8
Very nice! Is it a stone or plaster finish? Do you have any more photos of the build please?
|
|
stoker
Junior Member
Posts: 61
|
Post by stoker on May 14, 2016 8:37:06 GMT -8
Pretty!
Lots of non-standard aspects that I'm curious about...
What system-size is it?
Where's the riser, and how tall is it? From the picture I get the impression that a riser according to the standard recommendations from the formula wouldn't fit under the top surface. Is something unusual going on in this design?
How does the air intake work? It looks as if there's an opening below the firebox. Does air go somehow from there into the front of the firebox and the tube that runs along the firebox floor?
|
|
|
|
Post by mkrepel on May 14, 2016 15:23:07 GMT -8
Stunning look! You have raised RMH to an art form.
|
|
|
|
Post by shilo on May 15, 2016 2:54:32 GMT -8
the finish is plaster. system-size is 120mm the riser is at the left side it is 4.1B tall. see here donkey32.proboards.com/thread/1845/scandalthe air intake is an opening below the firebox. air go from there into the front of the firebox and to the tube that runs under the firebox floor |
|
