|
Post by fasardi on Apr 24, 2019 10:33:34 GMT -8
Hi to all! i couldn´t find, in the forum or in batchrocket.eu, if the portal depth could be other than 50 mm. Here in the Patagonia Argentina i find only 63 mm width refractory bricks and cut them to 50 mm will be a major headache. If it can`t be done, i`ll have to order them by mail, that was my first choice, but i figured i could ask. Thanks everyone!
|
|
|
Post by peterberg on Apr 24, 2019 12:52:11 GMT -8
Back in 2012 I tried several different port depths. In the development heater, a BBR6, using a port deeper than 100 mm (4") results tended to be less good. So, 63 mm won't be a problem in any system of 6" and up.
|
|
|
Post by fasardi on Apr 24, 2019 15:08:02 GMT -8
Back in 2012 I tried several different port depths. In the development heater, a BBR6, using a port deeper than 100 mm (4") results tended to be less good. So, 63 mm won't be a problem in any system of 6" and up. Thanks a lot! I'll go for it
|
|