Stainless duct liner

ElfN
New Member

Posts: 9

Stainless duct liner Nov 16, 2009 16:07:08 GMT -8

Quote

Post by ElfN on Nov 16, 2009 16:07:08 GMT -8

I have my riser (6" well casing) and my radiator (extra large water pressure tank all prepped and ready to go) and my fire brick and red brick and clay and perlite and sand and . . . Oh, yeah, and stove pipe for the bit that goes up and out.

I've built a test stove outside just to play. norishouse.com/archives/date/2008/08. You'll need to scroll down, the post is at the bottom.

I couped some 6" stainless flexible ducting I would like to use for my thermal mass ducting. Has anyone built with it before? Any thoughts? Caveats?

Thanks.

ElfN

Take a minute and make a donation to support RMH testing/certification. Paypal your contribution to eawisner@gmail.com.

gorbull New Member Posts: 9	Stainless duct liner Nov 16, 2009 16:42:16 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by gorbull on Nov 16, 2009 16:42:16 GMT -8 Sorry to say, yer link does not work.

ytksgmt New Member Posts: 10	Stainless duct liner Nov 17, 2009 8:08:27 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ytksgmt on Nov 17, 2009 8:08:27 GMT -8 norishouse.com/archives/date/2008/08 may work

Donkey Administrator Posts: 1,888	Stainless duct liner Nov 17, 2009 8:36:08 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Donkey on Nov 17, 2009 8:36:08 GMT -8 Woah, elfnori... Why do you need a five foot tall heat riser??

ElfN
New Member

Posts: 9

Stainless duct liner Nov 27, 2009 6:10:43 GMT -8

Quote

Post by ElfN on Nov 27, 2009 6:10:43 GMT -8

Nov 17, 2009 8:36:08 GMT -8 Donkey said:

Woah, elfnori...
Why do you need a five foot tall heat riser??

<LOL> It isn't so much that I need the riser to be tall, I need the burn chamber to be a little longer. I need to go through a wall.

ElfN

Take a minute and make a donation to support RMH testing/certification. Paypal your contribution to eawisner@gmail.com.

Solomon: Best way to not die in a house fire is to build a stove where the really hot stuff isn't near the flammable stuff. Jan 10, 2023 11:34:39 GMT -8

beppe: I have a living room+ kitchen of 75 square meters that was heated by an ordinary pellet stove with a power of 8KW. Aug 30, 2023 22:19:29 GMT -8

beppe: I want to switch to a DIY pellet rocket stove but I haven't found yet a project that is really suitable for my situation. Is there anybody able to indicate to me a good detailed project? Sept 4, 2023 9:05:15 GMT -8

Post by ElfN on Nov 16, 2009 16:07:08 GMT -8

Post by gorbull on Nov 16, 2009 16:42:16 GMT -8

Post by ytksgmt on Nov 17, 2009 8:08:27 GMT -8

Post by Donkey on Nov 17, 2009 8:36:08 GMT -8

Post by ElfN on Nov 27, 2009 6:10:43 GMT -8

Shoutbox