|
Post by wukung on Oct 27, 2017 12:58:29 GMT -8
Hello, I am looking for a way to use rocket kilns for firing ceramics. One of rocket's pros which became attractive to me is a high heat-to-fuel performance. it could give some saving in wood or other fuel but the most important parameter is a temperature. Kiln need to heat up the ceramics up to 1400 degrees(depending glaze or clay type) but the most common tempearatures are 900, 1100 deg. C. Does anyone perform some experiments in this area? regards, Wukung
|
|
docbb
Junior Member
Back from ZA
Posts: 92
|
Post by docbb on Oct 29, 2017 9:09:18 GMT -8
|
|