brco
New Member
Posts: 12 
|
Post by brco on Oct 27, 2015 13:57:39 GMT -8
hi I'm new here and this is my first build. I would like to heat a small, straw cottage, heats the water and sometimes cook. I do not have a chimney yet, so we'll see if it will work  . I would like to thank all of you for your help, Special Peterberg. thanks Some pictures link here: |
|
radek
Junior Member
Posts: 94
|
Post by radek on Oct 29, 2015 1:32:14 GMT -8
that is a nice build,what is the ISA of your stove?And congratulation on the beautiful cottage.
|
|
brco
New Member
Posts: 12
|
Post by brco on Oct 29, 2015 11:09:14 GMT -8
Thanks. ISA bell is about 5.4 square meters + 3.5 m tunnel inside the bench.hope,going to work...
|
|
|
|
Post by dustylfc on Oct 30, 2015 15:16:17 GMT -8
Nice work
|
|
|
|
Post by dustylfc on Nov 2, 2015 12:24:19 GMT -8
Did it work well ?
|
|
brco
New Member
Posts: 12
|
Post by brco on Nov 2, 2015 22:24:00 GMT -8
So far I have started a fire twice, the stove is still very wet, all the water condenses in the chimney, chimney "crying" -but it looks very good,nicely burns... |
|
brco
New Member
Posts: 12
|
Post by brco on Nov 15, 2015 13:04:21 GMT -8
After two weeks, it is almost dry, setting fire is very good, good draft, I am satisfied with the result. Still need to insulate the chimney and connect boiler (first produce)...
|
|
brco
New Member
Posts: 12
|
Post by brco on Feb 18, 2016 14:09:48 GMT -8
Finaly,boiler is conected and working wery good,heater as well .  Usually burn two hours a day to keep the temperature above 20 degree with soft wood.But yet does not live there, the real test will be next winter And here are pictures |
|
|
|
Post by mkrepel on Apr 24, 2016 14:10:01 GMT -8
Nice looking stove. What did you use to limit the pressure on the boiler setup?
|
|
brco
New Member
Posts: 12
|
Post by brco on Apr 26, 2016 11:28:21 GMT -8
Nice looking stove. What did you use to limit the pressure on the boiler setup? It is non-pressurized boiler, by gravity and there is a pipe on the highest point connected to waste pipe,just for the case... |
|
. I would like to thank all of you for your help, Special Peterberg. thanks