|
|
Post by ronyon on Feb 10, 2014 8:59:07 GMT -8
Bells, benches, water barrels, all for capturing thermal energy, should there be a seprate section dedicated to discussIng these components?
|
|
|
|
Post by Donkey on Feb 13, 2014 17:09:40 GMT -8
Not a bad idea.. Should I put it to a vote or just build it and see if they come??
|
|
|
|
Post by 2tranceform on Feb 14, 2014 6:55:09 GMT -8
Bells, benches, water barrels, all for capturing thermal energy, should there be a seprate section dedicated to discussIng these components? Good idea. Not a bad idea.. Should I put it to a vote or just build it and see if they come?? Let's have a vote to see if we should vote on the proposed addition.  |
|
|
|
Post by pinhead on Feb 14, 2014 8:38:41 GMT -8
I think it's a good idea. Especially since there are relatively few "iterations" of the core rocket stove (wile building an ACTUAL rocket stove) but there are a virtually infinite array of heat exchangers.
|
|
|
|
Post by Robert on Feb 14, 2014 14:38:07 GMT -8
|
|
|
|
Post by ronyon on Feb 15, 2014 18:24:45 GMT -8
Thanks Donkey!
|
|
|
|
Post by photoman290 on Jun 7, 2014 9:25:05 GMT -8
i have always thought PCMs should be included somewhere. i have done a fair bit of reading and sodium sulphate looks like a good candidate for thermal capture. changes phase at 32c so just right for the top of a RMH when it starts to cool down.
|
|
