adiel
Junior Member
Posts: 119
|
Post by adiel on Apr 27, 2015 10:19:10 GMT -8
hi all would really love some comments on this project www21.zippyshare.com/v/0iojobB1/file.htmli plan on doing something here with the half barrels and a flue that will allow the bell to be filled and that there will also be a bypass. sorry if my skp is not clear.. thanks adiel
|
|
|
Post by peterberg on Apr 28, 2015 2:29:52 GMT -8
Couldn't read your file, my XP computer won't run SketchUp 15. Would you please convert to version 14?
|
|
adiel
Junior Member
Posts: 119
|
Post by adiel on Apr 28, 2015 3:07:07 GMT -8
|
|
|
Post by peterberg on Apr 28, 2015 3:50:49 GMT -8
The biggest problem here would be leakage of the bell, which seems to consist of two cut-up barrels. What is the path of the smoke, this is not clear?
|
|
adiel
Junior Member
Posts: 119
|
Post by adiel on Apr 28, 2015 7:13:55 GMT -8
i'll try to explain - from the riser in the first barrel it will go to the second barrel heating the oven and then or through the bypass or down to the half barrels and then through the flue that is inside the half barrels to the chimney. do you think it can do that? leaks - i thought about covering all the connection between the barrels with cob and thought that because it is like a triangle it will hold and stop leaks. but i see the potential problems and will do my best to seal it all.
|
|