|
Post by shilo on Feb 25, 2015 13:22:16 GMT -8
is this valuable for rmh installation? link
|
|
|
Post by peterberg on Feb 25, 2015 13:43:18 GMT -8
It could be a handy tool to tune the size of a bell. When the draft is deminishing within 15 to 20 minutes from startup you'll know your heater is close to a chimney stall. If that's the case, you have to do something to extract less heat from the exhaust gases. And after the adjustments you are able to test it again and measure the difference.
|
|
|
Post by shilo on Feb 25, 2015 14:41:41 GMT -8
can I use it to diagnose chimney problems? link
|
|
|
Post by shilo on Feb 25, 2015 14:46:44 GMT -8
I am looking for an Absolut way to determine if a problem is at the heater or at the chimney/weather.
|
|
|
Post by peterberg on Feb 26, 2015 1:14:12 GMT -8
can I use it to diagnose chimney problems? link In the sense that you can rule the chimney out of the equasion, yes. When there's adequate draft to begin with and it's going down after lighting the fire up to a chimney stall, the problem is in the heater. One thing you could do is investigate what a minimum draft value would be for a given heater design.
|
|
|
Post by shilo on Mar 1, 2015 7:40:56 GMT -8
what more valuable for rmh installation, testo 510 or 511?
|
|
|
Post by peterberg on Mar 1, 2015 13:07:10 GMT -8
Not the foggiest idea, sorry.
|
|